Air Sampling Pumps and Calibrators

TSI 4146 Primary Calibrator

TSI 4046 Primary Calibrator 2.5 - 300 LPM

TSI 4143 Mass Flowmeter

Sensidyne's GILIBRATOR-2 System provides the user with a convenient and highly automated way to check almost any commercially available air sampling pump for proper air flow function before its deployment. The system consists of an electronic GILIBRATOR-2 Base, which is used with any of three sizes...

High flow, 2 -30 L/min

Low flow, 1 - 250 mL/min

All cells and printer

The Primary Flow mini- BUCK Calibrator is an industry first for day-to-day flow verification and calibration of your microbial air sampling pumps, which require 1/2" hoses to minimize backpressure.

Includes 5 pumps, a 5 station battery charger, 5 Air Boss kits, 5 tool kits, 5 36" tubing sets, 5 cassette holder kits, manuals and carrying case. *Available to US Clients Only

Gilibrator Soap 8 oz

Gilibrator Printer Paper 1 Roll

BUCK BioAire Rotameter

Rotameter 0.4 - 4 L/min

Rotameter 1 - 20 L/min

Rotameter 3 - 30 L/min

Replacement flow indicators for use with the Zefon Bio-Pump and Bio-Pump Plus.

The Zefon Z-Lite IAQ DC Powered Sampling Pump is a battery powered portable pump designed for IAQ sampling with low backpressure sampling devices such as spore traps at flow rates from 2-20 LPM.

Rotameter .06-.5 lpm

Luer Adapter 12 pack

Brass E-lite adapter

TSI Calibrator adapter for Biopump

The Zefon Bio-Pump® Plus is the smallest and lightest portable battery powered IAQ sampling pump available. It provides the simplest and most convenient way to sample with Air-O-Cell® and Via-Cell® cassettes at a flow rate of 15LPM. Features: New 'Quick Sample' feature makes sampling...

The Buck Bioaerosol Sampling Pump is compact, lightweight and specifically designed for sampling with Air-O-Cell cassettes. The easy, full-control keypad lets you decide on the length of the retrieval with the touch of a button. Attachable rotameter allows for easy calibration. Both an LED and...

Designed specifically for IAQ sampling, this little pump packs a lot of power. The E-Lite pump produces a high volume of vacuum airflow. Set the rotameter to the flow desired, and use this pump for non-viable mold sampling cassettes, or viable mold sampling impactors. This pump is not recommended...

E-Lite Pump with Case

Buck Bio Slide Sampling Pump The BUCK BioSlide™ Model B1020 Sampling Pump is a compact, lightweight 10-20 LPM controlled flow sampling pump for bioaerosol sampling. The easy, full-control keypad lets you perform unattended time programmed (1, 2, 5, or 10 minute) samples, perform easy...

AP Buck Quick Charger for Libra Series Low Volume Sampling Pumps

Heavy Duty, rotary vane pump with a 1/10 hp motor! The EMSL Rotary Vane pump is a cost effective alternative to other rotary vane pumps. This pump is ideal for running all-day PCM and/or TEM samples, and can also handle any viable or non-viable mold sampling cassettes. Comes with flow control valve...

Comes with: 2 Pumps, 2 Stands, 2 sections of 6ft tubing and heavy duty case.

The EMSL Diaphragm Sampling Pump is a 23-stroke, high volume, economical workhorse. With a locking flow valve attached, use these pumps on your asbestos, lead or mold projects. Each pump comes with a locking flow control valve, hose barb, 10 ft tubing and an on/off switch. Flow Rates: PCM...

Pump kit Comes with: 2 pumps, 2 stands, 2 sections of 6 ft tubing and heavy duty case.

The Buck Libra™ is a low-cost high-performance constant flow personal air sampling pump. It is a “no frills” model designed for sampling of asbestos, lead, and other airborne contaminates. The rugged, compact design features a rechargeable nickel-cadmium battery with available...

With 5 Single Chargers

With 1 Multi-Station Charger

Use the Libra Plus air sampling pump for sampling media such as 25 and 37mm filter cassettes, bubble impingers, long-duration color detector tubes; to gauge personnel exposure to gases, vapors, particulates, aerosols, etc. No tools are required to operate this pump and Keys lock to prevent it from...

Designed for lead and asbestos monitoring. Rugged and dependable construction will withstand the toughest industrial environments. This pump is made to outlast and outperform larger and more costly pumps. The built-in rotameter monitors flow rates over the entire flow range of 0.5-3.0 L/min. The...

With 5 Single Chargers *Available to US Clients Only.

With 5 Single Chargers

The Sensidyne Gilian GilAir-3 Constant Flow Sampling Pump provides industrial hygienists and safety managers with a dynamic air sampling system operating at a flow rate of 1-3000 cc/min. This comprehensive 3-in-1 sampler performs filter cassette, single and multiple sorbent tube sampling with...

With 5 Single Chargers *Available to US Clients Only.

The Sensidyne Gilian GilAir-5 Constant Flow Sampling Pump provides industrial hygienists and safety managers with a dynamic air sampling system operating at a flow rate of 1-5000 cc/min. This comprehensive 3-in-1 sampler performs filter cassette, single and multiple sorbent tube sampling with...

With 5 Single Chargers *Available to US Clients Only.

The Sensidyne Gilian LFS-113 Air Sampling System is a comprehensive function, dual-mode air sampler offering constant low flows of 5-200 cc/min and multi-tube flow rates of 1 to 350 cc/min. Pump comes standard with charger, tubing, air boss, tube holder and tool kit. Built-in sorbent tube end...

With 5 Single Chargers *Available to US Clients Only.

The Air One personal sampling pump is a low cost, durable pump designed for use in asbestos and lead abatement. It is designed to be used in harsh environments where it may be subject to rough handling and exposure to water and humidity. The pump is construced of thick, impact resistant...

The Air One personal sampling pump kit comes with 5 pumps and 5 chargers in a hard case.

This personal air sampler consists of a pump contained in a high-impact RFI/EMI shielded case, exclusive electronic circuit board for constant flow control, an LCD display with 2 lines of 16 characters, a double diaphragm pump mechanism and a rechargeable nickel metal hydride battery pack.

Buck Quick Five Charger

The Gillian BDX II Abatement Air Sampler from Sensidyne is a dependable, low cost personal sampling pump. It is a "no fills" models designed for use with asbestos and lead sampling. Meets NIOSH 7400, 7082, 7105 and 7300 specifications. Features Flow rates - 500-3000 cc/min (.50-3...

Pelican Carrying case for all BIOS Calibrators and accessories that are included

Buck BioAire Replacement Battery

Aircon-2 High Volume Air Sampler Extended Flow Range: 2-30 LPM flow range designed for collecting particulates in a given plant area. Fully Programmable: Can be programmed with up to three custom timing routines for unattended sampling up to 99 hours. Touchpad & LCD Display: Allows easy...

Air One Battery Pack replacement

The Gilian 5000 is a 5 liter flow personal sampling pump featuring a flow range of 20 to 5000cc, high backpressure ability (up to 70” H20 back pressure at 1LPM), an easy to use interface and memory free NiMH batteries. Features: Live Flow Display Large display continuously shows real-time...

Asbestos/Lead Sampling Stand

IAQ Sampling Stand

Replacement charger for Bio-Pump

Replacement battery for Bio-Pump.

The Bio-Pump remote sampling extension is a 5 ft section of non-restricting tubing which connects to Bio-Pump and allows sampling in small or remote locations.

Debris filter.

120v charger

120v charger

Replacement charger

Replacement Battery

Replacement charger

Replacement Battery

Replacement charger

Replacement Battery

Replacement charger

Replacement Battery

1-500 cc for GilAir-3 and GilAir-5 pumps

1-750 cc for GilAir-3 and GilAir-5 pumps

6 x 70 mm for use with charcoal tubes

10 x 110 mm for use with sorbent tubes

Contains: 6x70 mm, 10x110 mm,10x150 mm,10x175 mm, 5X150 mm, 7x130 mm tube holders. Also includes single, double and triple manifolds

This Dorr-Oliver cyclone is designed to separate the respirable fraction of airborne dust from the nonrespirable fraction. It consists of a two-stage cyclone and lightweight aluminum frame, which mounts a standard 2 or 3 piece 37mm filter cassette. When air enters the cyclone stage at 1.7 L/min (as...

Gilian Universal 5 Station Charger For use with all Gilian pumps except the Gilian 3500 and LFS series.

Buck Universal Low-Flow Controller-Used to achevie lower flow rates of 5-800 cc with Buck Sampling pumps

Rotary Vane Muffler

Street Elbow

Rotary Vane Silencer

Plastic Jar

Straight Hose Barb

Elbow Hose Bar

Glass Jar replacement

Zefon brand 5 station battery charger for use with the Sensidyne Gilian BDXII Abatement Air Sampling Pump

Silencer for EMSL Diaphragm pump

The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100...

Features: Patented electronic laminar flow control Internal secondary standard calibrates the pump continuously for compliance with OSHA 3058. Check against a primary standard only once a month or every 200 hours for coal mine dust sampling. Inlet filter traps moisture and particular...

The Escort LC Sampling Pump can be used with a variety of personal and area sampling devices to collect such airborne contaminants as asbestos fibers, toxic gases, vapors, particulates, fumes and mists. It can also be used to sample silica dust, coal dust and organic vapors...

Zefon's Gemini Twin-Port Sorbent Tube Sampler can be used with the Escort ELF, or just about any other sampling pump able to pull a flow rate of 1.5LPM at 25" of water backpressure. It offers increased flexibility and control in gathering samples through sorbent tubes. If air is being sampled for...

Aircon 2 Battery Pack

Aircon 2 module 120V

This Dorr-Oliver cyclone is designed to separate the respirable fraction of airborne dust from the nonrespirable fraction. It consists of a two-stage cyclone and lightweight aluminum frame, which mounts a standard 2 or 3 piece 37mm filter cassette. When air enters the cyclone stage at 1.7 LPM (as...

Manifold 3 way tube holder

Sterile surface swabs are an easy way to sample suspect areas for mold contamination. Simply swab the suspect area and submit to a laboratory where the sample will be cultured and the type of organism identified. Each swab comes in an easy to use container for sampling, transport and storage.

Single Variable flow kit 7-10 x 150 mm

Single Variable Flow kit 7-10 x 110 mm

Locking Flow Valve Assembly includes hose barb

The Zefon Cyclone Calibration Jar is a 1L container with all the proper fittings and connections needed to calibrate sampling pump flow rates with Zefon or SKC Aluminum Cyclones.

The Zefon Respirable Dust Aluminum Cyclone with holder is used in conjunction with 37mm 3 piece open face filter cassettes to separate dust particles by size with the respirable particles being collected on the filter and larger particles being removed. The collection efficiency curve meets the...

Zefon aluminum cyclone calibration adapter

NO DESCRIPTION FOUND

NO DESCRIPTION FOUND

NO DESCRIPTION FOUND

NO DESCRIPTION FOUND

6 Liter Summa Canister

6 Liter Summa Canister

6 Liter Summa Canister

6 Liter Summa Canister

6 Liter Summa Canister

6 Liter Summa Canister

6 Liter Summa Canister

6 Liter Summa Canister

6 Liter Summa Canister