|
Abrasion (Taber Rotary or Linear Method) |
Materials Testing Lab |
Mechanical and Physical |
|
Acanthamoeba spp. |
DNA and PCR Testing Laboratory |
Other |
|
Accelerants |
Indoor Air Quality (IAQ) Lab Services |
Other |
|
Accelerants |
Materials Testing Lab |
Fire Investigation |
|
Acetaldehyde by NIOSH 2016M |
Industrial Hygiene (IH) Lab Services |
Other |
|
Acetic Acid by NIOSH 1603 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Acetoin by OSHA 1013 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Acetone (Dimethyl Ketone) by NIOSH 1300 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Acetonitrile by NIOSH 1606 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Acid Insoluble Ash |
Food and Beverage Testing |
Chemistry |
|
Acid Producing Bacteria (APB) |
Microbiology Laboratory |
Bacteria |
|
Acid Profile NIOSH 7903 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Acid Value |
Food and Beverage Testing |
Chemistry |
|
Acidity |
Environmental Chemistry Lab Services |
Wet Chemistry |
|
Acids Profile (Inorganic) by NIOSH 7903 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Aciduric Flat Sour Sporeformers |
Food and Beverage Testing |
Microbiology |
|
Acinetobacter baumannii |
Hospitals and Healthcare Environmental Lab Services |
Healthcare Pathogens (HAIs) |
|
Acrolein by NIOSH 2016M |
Industrial Hygiene (IH) Lab Services |
Other |
|
Acrylonitrile by NIOSH 1604 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Advanced polymer ID (bulk, filler, plasticizer ID) |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
AE (SVOC-Acid Extractables) by GC/MS 625.1/8270E |
Environmental Chemistry Lab Services |
Organics |
|
Aerobic Bacteria by GC-FAME (NIOSH 0801) |
Microbiology Laboratory |
Bacteria |
|
Aerobic Place Count (Air Plate) |
Food and Beverage Testing |
Microbiology |
|
Aerobic Plate Count (APC) |
Food and Beverage Testing |
Microbiology |
|
Aerobic Spore Former Count |
Microbiology Laboratory |
Bacteria |
|
Aerobic Sporeformer |
Food and Beverage Testing |
Chemistry |
|
Aerobic Sporeformers |
Food and Beverage Testing |
Microbiology |
|
Air |
Lead and Metals Lab Services |
Other |
|
Air (NIOSH 7082) |
Lead and Metals Lab Services |
Flame AA |
|
Air or Bulk Sample Analysis by SEM and PLM |
Indoor Air Quality (IAQ) Lab Services |
Asbestos |
|
Air Sample Analysis by PCM |
Indoor Air Quality (IAQ) Lab Services |
Asbestos |
|
Airborne Cement Dust as PNOR NIOSH 0500 / 0600 / 7500 RCS. |
Industrial Hygiene (IH) Lab Services |
Other |
|
Airborne Contaminants |
Materials Testing Lab |
Other |
|
Airborne Dust PM10 (40 CFR Part 50.6 Appendix J) Air Type |
Industrial Hygiene (IH) Lab Services |
Other |
|
Airborne Dust TSP (40 CFR Part 50.6 Appendix B) Air Type |
Industrial Hygiene (IH) Lab Services |
Other |
|
Airborne Oil Mist |
Indoor Air Quality (IAQ) Lab Services |
Other |
|
Airborne Oil Mist (FTIR) by NIOSH 5524 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Alcohol Content (Ethanol) |
Food and Beverage Testing |
Chemistry |
|
Alcohol Scan by GC 8015D |
Environmental Chemistry Lab Services |
Organics |
|
Algae Toxins |
Microbiology Laboratory |
Aquatic Microbiology |
|
Alkaline Dust by NIOSH 7401 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Alkalinity, Total |
Environmental Chemistry Lab Services |
Wet Chemistry |
|
Almond |
Food and Beverage Testing |
Allergens |
|
alpha-Chloroacetophenone (Tear Gas) by CSI method |
Industrial Hygiene (IH) Lab Services |
Other |
|
Aluminum (Al) |
Lead and Metals Lab Services |
|
|
Americium-241 |
Radiological Testing |
Other |
|
Ammonia by NIOSH 6016 |
Industrial Hygiene (IH) Lab Services |
Other |
|
Ammonia by OSHA ID188M |
Industrial Hygiene (IH) Lab Services |
Other |
|
Ammonia via Draeger X-Act 7000 |
TO-15 Air Toxics Laboratory |
Fixed Gases |
|
Amorphous Silica Air Samples by NIOSH 7501 |
Industrial Hygiene (IH) Lab Services |
Silica |
|
Amorphous Silica Bulk Samples by NIOSH 7501 |
Industrial Hygiene (IH) Lab Services |
Silica |
|
Amygdalin |
Food and Beverage Testing |
Chemistry |
|
Anaerobic Plate Count |
Microbiology Laboratory |
Bacteria |
|
Anaerobic Plate Count |
Food and Beverage Testing |
Microbiology |
|
Anaerobic Spore Former Count |
Microbiology Laboratory |
Bacteria |
|
Anaerobic Sporeformer |
Food and Beverage Testing |
Chemistry |
|
Anaerobic Sporeformers |
Food and Beverage Testing |
Microbiology |
|
Analytical Microscopy |
Consumer Products Testing |
Other |
|
Anaplasma phagocytophilum |
DNA and PCR Testing Laboratory |
Bacteria |
|
Anions GROUP SCAN by Ion Chromatography |
Environmental Chemistry Lab Services |
Materials Characterization |
|
Anisidine Value |
Food and Beverage Testing |
Chemistry |
|
Anthrax - Bacillus anthracis |
Microbiology Laboratory |
Bacteria |
|
Antimicrobial Coating Efficacy |
Microbiology Laboratory |
Special Projects / Research and Development |
|
Antimicrobial Coating Efficacy |
Consumer Products Testing |
Other |
|
Antimicrobial Effectiveness |
Consumer Products Testing |
Other |
|
Antimicrobial Effectiveness / Preservative Efficacy |
Cosmetics & Personal Care Products |
Special Projects / Research and Development |
|
Antimony (Sb) |
Lead and Metals Lab Services |
|
|
AOAC 955.17 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC 960.09 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC 961.02 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC 961.02 Modified |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC Germicidal & Detergent Action |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC Use Dilution - Additional |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC Use Dilution - Broad |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC Use Dilution - Limited |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC Use Dilution - Medical |
Microbiology Laboratory |
Special Projects / Research and Development |
|
AOAC Use Dilution Test |
Microbiology Laboratory |
Special Projects / Research and Development |
|
APC (Aerobic Plate Count) |
Microbiology Laboratory |
Bacteria |
|
Apparent Bending Modulus of Plastics by Means of a Cantilever Beam |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
Appendix IX Metals (17) |
Environmental Chemistry Lab Services |
Metals |
|
ARMI - American Relative Moldiness Index 13 Panel |
Indoor Air Quality (IAQ) Lab Services |
Other |
|
Aromatic Hydrocarbon Biodegradation Markers |
DNA and PCR Testing Laboratory |
Other |
|
Arsenic (As) |
Lead and Metals Lab Services |
|
|
Artificial Colors and Dyes |
Food and Beverage Testing |
Chemistry |
|
Artificial Sweeteners (as single analyte/need to be specified) |
Food and Beverage Testing |
FDA Detain |
|
Artificial Sweeteners (aspartame, acesulfame-K, cyclamate, saccharin) |
Food and Beverage Testing |
Chemistry |
|
Asbestos and Fiber Identifications |
Consumer Products Testing |
Other |
|
Asbestos in Consumer Products |
Asbestos Lab Services |
Special Projects Lab |
|
Asbestos in Cosmetics |
Asbestos Lab Services |
Special Projects Lab |
|
Asbestos in Lung Tissue by Chemical Bleach Digestion |
Asbestos Lab Services |
Special Projects Lab |
|
Asbestos in Paint, Crayons and Other Pigments |
Asbestos Lab Services |
Special Projects Lab |
|
Asbestos in Powders |
Asbestos Lab Services |
Special Projects Lab |
|
ASH |
Materials Testing Lab |
Other |
|
Ash |
Materials Testing Lab |
Fire Investigation |
|
Ash |
Environmental Chemistry Lab Services |
Other |
|
Ash |
Food and Beverage Testing |
Chemistry |
|
Aspergillus Common 10 Panel |
DNA and PCR Testing Laboratory |
Mold and Fungi |
|
Aspergillus Comprehensive 15 Panel |
DNA and PCR Testing Laboratory |
Mold and Fungi |
|
Aspergillus Nosocomial 6 Panel |
DNA and PCR Testing Laboratory |
Mold and Fungi |
|
Aspergillus/Penicillium Screen |
Microbiology Laboratory |
Mold and Fungi |
|
Asphalt Fumes by NIOSH 5042M (Particulate / Benzene Sol. Fraction) |
Industrial Hygiene (IH) Lab Services |
Other |
|
Asphalt Fumes by OSHA58 (Benzene Sol. Fraction) |
Industrial Hygiene (IH) Lab Services |
Other |
|
Aspirin Contamination |
Materials Testing Lab |
Other |
|
ASTM C1338 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D1210 Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Scale |
Materials Testing Lab |
Other |
|
ASTM D1308 Effect of Household Chemicals on Clear and Pigmented Organic Finishes |
Materials Testing Lab |
Other |
|
ASTM D1475 Density of Paint, Varnish, Lacquer, and Related Products |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D1545 Viscosity of Transparent Liquids by Bubble Time Method |
Materials Testing Lab |
Other |
|
ASTM D1640 Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D185 Coarse Particles in Pigments in Pastes and Paints |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D2020 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D215 Chemical Analysis of White Linseed Oil Paints |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D2369 Volatile Content of Coatings |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D2372 Separation of Vehicle from Solvent Reducible Paints |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D2574 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D2621 Infrared Identification of Vehicle Solids from Solvent Reducible Paints |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D2805 Hiding Power of Paints by Reflectometry |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D2830 |
Materials Testing Lab |
Other |
|
ASTM D3273 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D3335 Low Concentrations of Lead, Cadmium, and Cobalt in Paint by AA |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D3359 Measuring Adhesion by Tape Test |
Materials Testing Lab |
Other |
|
ASTM D3456 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D3723 Pigment Content of Water Emulsion Paints by Low Temperature Ashing |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D374 Thickness of Solid Electrical Insulation |
Materials Testing Lab |
Other |
|
ASTM D3792 Water in Paints and Paint Materials by Karl Fischer Method |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D3960/EPA Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D4062 Leveling of Paints by Draw-Down Method |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D412 Vulcanized Rubber and Thermoplastic Elasomers - Tension |
Materials Testing Lab |
Other |
|
ASTM D413 Rubber property-Adhesion to Flexible Substrate |
Materials Testing Lab |
Other |
|
ASTM D429 Rubber Property-Adhesion to Rigid Substrates |
Materials Testing Lab |
Other |
|
ASTM D430 Rubber Deterioration-Dynamic Fatigue |
Materials Testing Lab |
Other |
|
ASTM D4300 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D4400 Sag Resistance of Paints Using a Multi Notch Applicator |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D4445 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D4783 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D494 Acetone Extraction of Phenolic Molded or Laminated Products |
Materials Testing Lab |
Other |
|
ASTM D4958 Comparison of Brush Drag of Latex Paints |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D522 Mandrel Bend Test of Attached Organic Coatings |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D523 Specular Gloss |
Materials Testing Lab |
Other |
|
ASTM D542 Index of Refraction of Transparent Organic Plastics |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D543 Practice for Evaluating the Resistance of Plastics to Chemical Reagents |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D5588 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D5589 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D5590 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D562 Consistency of Paints using the Stormer Viscometer |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D570 Water Absorption of Plastics |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D572 Rubber - Deterioration by Head and Oxygen |
Materials Testing Lab |
Other |
|
ASTM D573 Rubber - Deterioration in an Air Oven |
Materials Testing Lab |
Other |
|
ASTM D575 Rubber Properties in Compression |
Materials Testing Lab |
Other |
|
ASTM D-5755 (MicroVac) |
Indoor Air Quality (IAQ) Lab Services |
Other |
|
ASTM D608 Speciation for Dibutyl Phthalate |
Materials Testing Lab |
Other |
|
ASTM D618 Practice for Conditioning Plastics for Testing |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D622 Rubber Hose for Automotive Air and Vacuum Brake System |
Materials Testing Lab |
Other |
|
ASTM D623 Rubber Property - Heat Generation and Flexing Fatigue in Compression |
Materials Testing Lab |
Other |
|
ASTM D624 Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
Materials Testing Lab |
Other |
|
ASTM D638 Tensile Properties of Plastics |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D6469 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D648 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D-6480 (Wipe Sample) |
Indoor Air Quality (IAQ) Lab Services |
Other |
|
ASTM D6763 Application of Brushed Film |
Materials Testing Lab |
Other |
|
ASTM D695 Compressive Properties of Rigid Plastics |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D696 Coefficient of Linear Thermal Expansion of Plastics Between -30C and 30C |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D6974 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM D704 Specification for Melamine-Formaldehyde Molding Compounds |
Materials Testing Lab |
Other |
|
ASTM D706 Specification for Cellulose Acetate Molding and extrusion Compounds |
Materials Testing Lab |
Other |
|
ASTM D707 Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds |
Materials Testing Lab |
Other |
|
ASTM D731 Molding Index of Thermosetting Molding Powder |
Materials Testing Lab |
Other |
|
ASTM D732 Shear Strength of Plastics by Punch Tool |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D746 Brittleness Temperature of Plastics and Elastomers by Impact |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D785 Rockwell Hardness of Plastics and Electrical Insulating Materials |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D787 Specification for Ethyl Cellulose Molding and Extrusion Compounds |
Materials Testing Lab |
Other |
|
ASTM D788 Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
Materials Testing Lab |
Other |
|
ASTM D789 Determination of Relative Viscosity and Moisture Content of Polyamide (PA) |
Materials Testing Lab |
Other |
|
ASTM D790 Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Mat. |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D792 Density and Specific Gravity (Relative Density) of Plastics by Displacement |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM D813 Rubber Deterioration - Crack Growth |
Materials Testing Lab |
Other |
|
ASTM D93 Flash-Point by Pensky Martin Closed Cup |
Materials Testing Lab |
Other |
|
ASTM D968 Resistance of Organic Coatings by Falling Abrasive |
Materials Testing Lab |
Polymers, Plastics, Paints and Coatings |
|
ASTM E1226: Explosion Severity (Kst, Pmax, [dP/dt]max) |
Combustible Dust Lab Services |
Combustible Dust Testing |
|
ASTM E1226: Go – No Go Testing (Explosive Screening) |
Combustible Dust Lab Services |
Combustible Dust Testing |
|
ASTM E1428 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM E1491/ASTM E2021: Minimum Ignition Temperature Test (MIT) |
Combustible Dust Lab Services |
Combustible Dust Testing |
|
ASTM E1515: Minimum Explosion Concentration (MEC) |
Combustible Dust Lab Services |
Combustible Dust Testing |
|
ASTM E2019: Minimum Ignition Energy (MIE) |
Combustible Dust Lab Services |
Combustible Dust Testing |
|
ASTM E2021: Layer Ignition Temperature (LIT) |
Consumer Products Testing |
Combustible Dust Testing |
|
ASTM E2149 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM E2180 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM E2315 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM E2783 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM E2931: Limiting Oxygen Concentration (LOC) |
Combustible Dust Lab Services |
Combustible Dust Testing |
|
ASTM E3135 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM G21 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM G22 |
Microbiology Laboratory |
Special Projects / Research and Development |
|
ASTM Leachate |
Environmental Chemistry Lab Services |
Wet Chemistry |
|
Auger Electron Spectroscopy (AES) |
Materials Testing Lab |
Other |
|
Auto-ignition |
Materials Testing Lab |
Mechanical and Physical |
|
Avian Pathogens |
Microbiology Laboratory |
Other |
Return to View all lab services |
Order Sampling Supplies
Request Pricing
Technical Questions
24/7 Account Access
Email Us
